Arborist safety depends on proper training and practices, yet it’s too usual for novice employees to be exposed to obsolete or incorrect tree removal material. Arborists can readily fall to forgetting, which develops undesirable habits if training is not correct. Even if the first training is excellent, tree removal firms should organize frequent training sessions to guarantee that all staff stays current with the help of the rigging rope. It is especially true while learning the fundamentals of tree rigging. Rigging tree stems are thorny, especially when dealing with more extensive or heavier branches. The repercussions of failing to manage the issue effectively might be fatal.

Let’s look at the fundamentals of tree rigging and some standard techniques used by arborists.

Why Is Tree Rigging Required For Arborists?

Rigging trees is advantageous for a multitude of reasons. It can, for example, avoid worker injuries, property damage, and power line strikes. Another way, tree rigging puts the arborist in command and eliminates the guessing involved in removing heavier stems.

Cutting branches and allowing them to fall to the ground is an invitation to disaster. The unit might collide with a worker or careen off another addition, causing chaos.

What Are The Things To Think About When Rigging?

Consider the following factors before beginning any rigging for an arborist job:

  • The rigging block is a pulley attached to a tree stem that helps you lower newly cut branches. 
  • Make sure the stem used for the rigging block can support the weight of any components you cut. You’ll need to utilize a rigging point backup.
  • Even if the fall is regulated, cut pieces will swing as they fall, ensuring no employees are in the way. Also, ensure there are no ropes in the path.

Examine the Tree’s Stability

You may use a correctly fitted tree to drop, raise, and swing stems, much like a crane. Before you begin, you should identify any flaws in the tree or branches below the rigging point. Look for decay columns or other risks that might prohibit you from putting weight on particular tree parts. Rigging setup necessitates others like rigging rope and jib sheet to understand wood flexibility and strength, which is gained mainly via experience. Ensure you have an experienced worker on hand to help with the rigging.

Before making any cuts, make sure you’ve done your study on wood weights. You should have a green log weight chart on hand to estimate weights. Furthermore, do not begin with the most significant cuts. Try your rigging operation with a few minor blemishes to check that everything operates correctly. It is suggested that you start with 50 percent of the weight you want to lose. It allows you and your ground crew to acquire a feel for the work while also testing the tree’s strength.

To Sum It Up!

Whether you’re new to tree rigging or have been in charge of tasks for years, recognizing and applying basic practices will help you avoid accidents while increasing efficiency. Stock up on a wide variety of reliable and durable rigging ropes or equipment to ensure you’re ready for your next rigging task.