Do you know if your toilet is in good shape?
It’s important to inspect and maintain your plumbing to prevent the onset of leaks or clogs. These issues can cause further problems down the road when your toilet begins to back up or leak.
But how do you check to see if your toilet is ready for a replacement or if it requires some quick repair and maintenance? You’ve come to the right place to find out.
Keep reading for a breakdown of how to tell if your bathroom toilet is in good shape.
Check the Water Level
Check the water level in the bowl to see if it is below the overflow pipe. This is a good sign that the bathroom toilet is in good shape.
If the water level is above the overflow pipe, this is a sign that the bathroom toilet needs to repair or replace. The ideal water level is about 1-2 inches below the overflow tube.
Look for Cracks
If your bathroom toilet is starting to show cracks, it may be time to replace it. Check for cracks in the bowl, tank, and base.
Cracks can occur for a variety of reasons, including age, wear and tear, and weathering. If you see any cracks, it’s important to inspect them to determine if they are a sign of a bigger problem.
If the cracks are small and don’t appear to be causing any structural damage, then the toilet may be old and in need of a replacement. Repair or upgrade toilet by a professional if the cracks are large or appear to be causing damage.
Examine the Flush Handle
First, the handle should be firmly attached to the tank and not wobbly. Second, the handle should not be loose when flushed and should return to its original position quickly. Finally, there should be no cracks or chips on the handle itself.
See if the Bowl Refills Quickly After Being Flushed
A quick refill time means that water is flowing freely through the pipes and into the bowl and that the flushing mechanism is working properly. If the bowl takes a long time to refill, it could be a sign that there is something wrong with the toilet bowl.
If the bowl refills slowly, there’s a problem with your toilet’s flushing mechanism, or your bathroom pipes are clogged. If you notice that your flushing toilet doesn’t refill at all after being flushed, you should call a plumber to inspect your bathroom toilet and pipes.
Check for Leaks Around the Base of the Toilet
If there is water on the floor around the toilet, there is likely a leak. A small drip from the base of the toilet can waste a lot of water and cause considerable damage to the floor.
Inspect the area around the base of the toilet regularly to make sure there are no leaks. You may need to use a mirror to see the area behind the toilet.
A Guide to Telling Your Bathroom Toilet Is Working as Intended
If you’re unsure of whether your bathroom toilet is in good shape, this guide will help you figure it out. If any of these components are damaged, it’s time to upgrade your toilet. So, don’t wait until your toilet is leaking or broken to replace it.
For the latest guides and advice about this topic, check out the rest of the articles on our blog.
