Installing an IP camera can be difficult, but it doesn’t have to be. If you are wondering how to install IP camera, follow these five easy steps; you can install your own IP camera in no time and begin surveilling your home or business as soon as possible. If you’re new to IP cameras and don’t quite know what to expect, here’s everything you need to know about how to install an IP camera.

Step 1: Select The Right Camera For Your Needs

Not all IP cameras are created equal. There are a variety of cameras on the market, so it’s important to select the one that best suits your needs. To do this, consider what you’ll be using the camera for. If you need a camera for security purposes, you’ll want one with night vision and possibly one that’s weatherproof. If you’re looking for something more discreet, look for something wireless or even hidden. When selecting a wireless camera, make sure to find out how far away from the base station it can transmit video without any interference. Amcrest offers a range of IP cameras that are of high-quality.

Step 2: Choosing A Good Location For Your Camera

Before you start drilling holes, it’s important to choose a good location for your camera. You’ll want to pick a spot that has a clear view of the area you want to monitor, and is out of reach of potential vandals. It’s also important to make sure the camera is close enough to an electrical outlet so you can easily plug it in (if not wireless). Once you’ve found the perfect spot, use a level to mark where you’ll need to drill your holes. 

To avoid any jagged edges, use a hole saw instead of a drill bit. Make sure to take the height and width of your camera into account when deciding how big to make the hole – it needs to be big enough for your camera mount, but small enough that there are no gaps around it. If you have multiple cameras set up on one mount or pole, consider staggering them with each one slightly higher than the last so they’re easier to align later on.

Step 3: Plug It In

With your camera mount holes drilled, it’s time to mount your camera! First make sure that everything is level (and you’ve made any adjustments if necessary), then use your mounting hardware and any tools provided with your camera to secure it into place. When everything is in place, plug it into a nearby outlet or hardwire it if possible. It’s easier than you think!

Step 4: Connect It To Your Network

Now that you’ve got your camera all set up, it’s time to connect it to your network. This is actually the simplest process in the how to install IP Camera guide, and there are just a few things you need to do.  First, find the Ethernet port on the back of the camera and plug in the included Ethernet cable. Then, take the other end of the cable and plug it into your router. Make sure you’re plugged into the Internet or WAN port on your router. 

Next, turn the power switch at the back of the camera to ON (green). You should see a steady green light come on and stay lit for about 30 seconds before turning off again. If it stays lit for more than 30 seconds, try unplugging and replugging both ends of the Ethernet cable – sometimes this can help get an intermittent connection working again.

Step 4: Test It Out

Now that you have your camera all set up, it’s time to test it out. Now that your IP camera is set up, it’s time to test it out again. This time, you should be able to see and hear everything just fine. If not, go back and check the previous steps to make sure everything is still set up correctly. What if I want to change my settings after installing my IP camera? Your router likely has a web interface that will allow you to access your camera feed through a computer or tablet. You can adjust resolution, sensitivity, bandwidth allocation, and other settings as desired on this interface. Here are some things you can do to test your new IP camera: 

  • Check the video quality. Make sure the image is clear and there is no lag
  • Test the audio quality. Again, you want to make sure the sound is clear with no lag
  • Try out the motion detection feature, if your camera has one


If you are looking for ‘how to install IP Camera,’ it begins with buying the right IP Camera. Amcrest’s IP Cameras are of high-quality and easy to install. Check out some of our best IP Cameras!